又粗又深又猛视频国_亚洲中文字幕无码天然素人在线_久久久午夜影院欧美黄片_欧美性爱快速在线

Anhui Xoanons Chemical Co.,Ltd.

Anhui Xoanons Chemical Co., Ltd.

PRODUCTS

XOANONS?Additive

Surfactant
Polyacrylate leveling agent
Fluorocarbon modified polyacrylate leveling agent
Fluorine surfactant
Polyether modified silicon leveling agent
Reactive silicon additive with acrylic functional group
Substrate wetting agent
Anti-graffiti additive
Performance enhancer
Dispersant
Defoamer

JIAZHI? Easy-cleaning functional resin

Anti-graffiti and Anti-adhesive Resin for municipal engineering paint
Anti-pollution and rain-resistant resin for protective film of paint
Easy-cleaning resin for industrial paint
Anti-icing resin
Anti-graffiti resin for automotive leather and sofa leather
Anhui Xoanons Chemical Co.,Ltd.

PRODUCTS

JIAZHI?JZ-9582

Model number
JIAZHI®JZ-9582

Specification
Composition: Hydroxy acrylic resin solution modified by functional monomer
Appearance: Slight yellowish to yellowish translucent liquid
Solvent: BAC/Xylene
Content: 50±3%(140℃ 2h)
Viscosity: 100-1000mPa·s
(Rotating viscometer)(25±0.2)℃
Hydroxyl value: 72±5 mg KOH/g
(Theoretical value of solid resin)
Note: This datasheet is intended to give typical results, not
standard.Subject to COA.

Application system
Solvent-based
Properties
Excellent anti-marker performance under alcohol wiping conditions.
Good slip.
Excellent flexibility.
Better repairability.
Excellent scratch resistance and wear resistance.
Excellent weather resistance.
Excellent resistance of carburetor cleaning agent.

Storage stability
Keep intact 36 months in original package.Products beyond the storage period may continue to be used after inspection. The container must be closed immediately after use.

Recommended formula
1. Suggestion for PU varnish formulation

 

Material

Dosage%

Part A

JZ-9582

80.00

BAC

18.75

Dryer(1%)

1.00

WE-D8920BR(leveling agent)

0.25

Total

100

Part B

N3390

11.60-13.50

Note:
1.NCO% of N3390=19.6, produced by Covestro, Germany.

 Different dosage of Part B, different performance in PPF

Part A/B proportion

100(A):11.6(B)

100(A):13.5(B)

tensile strength

110%±5

80%±5

oil-resistant pen

slightly residual

no residua

resistance of carburetor clean agent

no gloss lose in 30s

no gloss lose in 60s

2.The mixed part A and B should be used up within 5-7 hours in a sealed container. Otherwise, the mixed material will be gelled.
3.Suggest dry it at 110-130℃ for 2-3min. for automotive protective film, ripening at 60-80℃ more than 24h.
4.The advantages and disadvantages of fouling resistance and aging resistance depend on whether the coating is fully cross-linked; it is an effective method to put the surface treated film into the ripening box. It takes at least 24 hours during ripening, and the effect is better if it can reach more than 48 hours.
Package
25KG / 180KG

Application suggestion for paint protective film

NCO: OH=1.05

item

TPH film base

TPU film base

fouling-resistance from dry wiping

a little residue

a little residue

fouling-resistance from alcohol wiping

a little slight residue

a little slight residue

hydrophobicity

water contact angle>100°

water contact angle>110°

flexibility

elongation>120%

elongation>60%

recovery

hot healing

hot healing

chemical resistance
(Carburetor-resistance cleaner)

No changes in 30s

No loss of gloss in 30s

weather resistance

aging test of QUVB 3000h

aging test of QUVB 3000h

NCO: OH=1.2The following performance changes.

item

TPH film base

TPU film base

fouling-resistance from dry wiping

a little residue

a little residue

fouling-resistance from alcohol wiping

a little slight residue

a little slight residue

flexibility

elongation>100%

elongation>80%

chemical resistance
(Carburetor-resistance cleaner)

No changes in 60s

No loss of gloss in 60s

Instructions:
1. Baking conditions :110-130℃ 3min
Maturation conditions: 80 ℃ 48h
Coating thickness: TPH base 8-10μm TPU base 15-20μm
In view of the variability of substrate, film thickness, baking and aging conditions, the data provided in this table are for reference only.

2. Oil pen is used for pollution resistance test. The test method is to write on the film and place the film at room temperature for 3 min

3. The brand of carburetor cleaner used in chemical resistance test is Bontny.

Go
Top